| Work Condition |
|
| Height above sea level |
≤1000m |
| Environmental Temperature |
0°～40°C |
| Parameters |
|
| Dead Weight |
30.6×10^3kg |
| Max. Load |
31×10^3kg |
| Max. Speed |
≤80km/h |
| Overall Dimension: length X width X Height |
11950 mm×2495 mm×3970 mm |
| Engine System |
|
| Engine Type (cylinder/array/oil supply) |
In-line 6-cylinder,electronic-injection diesel engine |
| Engine Model |
D12 |
| Output Power |
279kW/1400-1800rpm |
| Discharge Capacity |
12.1 L |
| Max. Torque/speed |
1850Nm/1050-1300rpm |
| Tail Gas Discharge Standard |
EuroⅢ |
| Capacity of Oil Tank |
410L(with oil-water separator) |
| Chassis Parameters |
|
| Chassis Producing Area/ manufacturer /model |
Sweden/VOLVO Truck company/VOLVO FM12 |
| Chassis Drive Model |
6×4 |
| Power take-off model |
|
| Firstly wheelbase |
4900 mm |
| Secondly wheelbase |
1370 mm |
| Front wheel |
2028 mm |
| Back wheel |
1872 mm |
| Tyre Type |
12.00R20 |
| Arm support |
|
| Type |
Four-section, folding, full hydraulic |
| Diameter of delivery pipe |
DN125 |
| Length of end hose |
3m |
| Length of First section |
8700 mm |
| Turning angle of First section |
92° |
| Length of Second section |
7860 mm |
| Turning angle of Second section |
180° |
| Length of Third section |
8080 mm |
| Turning angle of Third section |
180° |
| Length of Fourth section |
8080 mm |
| Turning angle of Fourth section |
270° |
| Turning angle of revolving table |
365° |
| Horizontal length of arm support |
32.6 m |
| Vertical length of arm support |
36.6 m |
| Lubricating mode |
Lubrication with hydraulic oil at lubrication center |
| Oil tank capacity |
900 L |
| Control |
Manual/remote |
| Max. water pressure of water pump |
2 MPa |
| Cooling method of hydraulic oil |
Wind cooling |
| Pumping system |
|
| Drive mode |
Hydraulic type |
| Oil cylinder bore X stroke |
Φ140 ×2000 mm |
| Delivery cylinder bore X stroke |
Φ230 ×2000 mm |
| Type of valve |
S valve |
| Theoretical displacement of concrete |
Low pressure 120 m3/h |
| Theoretical displacement of concrete |
High pressure 67m3/h |
| Theoretical pumping pressure |
High pressure 11.8 MPa |
| Theoretical pumping pressure |
Low pressure 6.38 MPa |
| Theoretical pumping frequency |
High pressure 13 times/per minute |
| Theoretical pumping frequency |
Low pressure 23 times/per minute |
| High pressure pumping |
|
| Theoretical horizontal distance |
850m/125A pipe |
| Theoretical vertical distance |
200m/125A pipe |
| Hopper capacity |
0.6 m^3 |
| Material feeding height |
1.35 m |
| Oil pressure of the system |
32.5 MPa |
| Slump |
14 cm~23 cm |
| Max. aggregate size |
40 mm |
| High-low pressure switch-over |
Automatic switch-over |
